48″ Radius E Mower | 7 Gal Fuel Cap. | 1.5″-5″ Cut Heights | Up To 8MPH | 3.10 Acres Per Hour
Price Includes Back Freight To Our Location. Units Must Be Picked Up In Atwood. Shipping Not Available.
| RZE708GEM48C00 48″ Radius E Series | |
|
Starter |
Electric |
|
Steering Control |
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. |
|
Caster Forks |
.375″ thick caster yoke arms |
|
Front Caster Tires |
13 x 6.5-6, smooth tread, pneumatic. Bushings |
|
Drive Tires |
22 x 9.5-12 Super Turf TL |
|
Parking Brake |
Lever-actuated pawl brake. |
|
Tractor Frame |
Unibody, welded, heavy-duty 2″ X 3″ rectangular tubular steel. |
|
Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.30″-diameter cutter housing contains 17mm (.67″) diameter spindle shaft and hex blade drive. |
|
Electrical |
12-volt battery with 15-amp alternator. |
|
Standard Features |
Engine hour meter, cup holder, tow hitch and jack receiver |
|
Seat |
High back seat with foam padded seat cushion, armrests and integral safety switch |
|
Engine Brand |
Exmark |
|
Transmission Speeds |
Infinitely Variable |
|
Engine Model |
LC2P77F |
|
Engine Displacement |
708 |
|
Engine Series |
V-Twin |
|
Fuel System |
Carbureted |
|
Speed |
Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse. |
|
Transmission |
Hydrostatic |
|
Drive |
Hydro-Drive |
|
Engine Spec |
K5045 |
|
Engine Speed |
3,600 rpm |
|
Air Filter |
Standard Engine Manufacturer’s air filter |
|
Fuel Capacity |
7-gallon (26.5-L) single fuel tank with single fill location. |
|
Drive Description |
Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. |
|
Fuel Type |
Gas Carbureted |
|
PTO Engagement |
MagStop electromagnetic 125-ft-lb clutch |
|
Drive Wheel Release |
Allows unit movement without engine running. |
|
Fuel Indicator |
Translucent Visual |
|
Deck Lift |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
|
Carb Compliant |
No |
|
Safety Package |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
|
ROPS |
2-post foldable ROPS standard with seat belt and latch. |
|
Deck Style |
Floating Deck |
|
Deck Style Description |
Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. |
|
Width / Cutting Deck |
48″ |
|
Deck Construction |
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. |
|
Cutting Heights |
1.5″ (3.8 cm) to 5.0″ (12.7 cm) in 0.25″ (.6 cm) increments, adjustable from operator’s seat. |
|
Blade Tip Speed |
Approximately 18,500 fpm. |
|
Blades |
2 Blades at 24.5″ Length |
|
Width |
61 in (155 cm) |
|
Height |
69.7 in (177.0 cm) |
|
Length |
82.9 in (210.6 cm) |
|
Curb Weight |
849 |
UltraCut Deck Technology
Exmark’s exclusive UltraCut decks are featured on Radius models. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.